有重重复定义帮弄好 (文华财经WH6赢顺V6.7)

投资者咨询：有重重复定义帮弄好 (文华财经WH6赢顺V6.7)

来源:文华财经日期:2018-7-30 12:09

DIFF:EMA(CLOSE,12) - EMA(CLOSE,26),LINETHICK2;

DEA:EMA(DIFF,9),LINETHICK2;

MACD:2*(DIFF-DEA),COLORSTICK,NODRAW;

JC:=CROSS(DIFF,DEA);

SC:=CROSSDOWN(DIFF,DEA);

N1:=BARSLAST(JC)+1;

N2:=BARSLAST(SC)+1;

MA5:=MA(C,5),NODRAW;

HH:=VALUEWHEN(CROSSDOWN(DIFF,DEA),DIFF),NODRAW;//B点DIFF值

HHM:=VALUEWHEN(CROSSDOWN(DIFF,DEA),MA5),NODRAW;//B叉点5均线值

HHC:=VALUEWHEN(CROSSDOWN(DIFF,DEA),C),NODRAW;//B叉点K收盘价

HH2:=REF(HH,N2),NODRAW;//A点DIFF值

HHM2:=REF(HHM,N2),NODRAW;//A点5均线值

HHC2:=REF(HHC,N2),NODRAW;//A点K收盘价

CON:=HH2>HH&&(HHM2<HHM||HHC2<HHC);

BB:=BACKSET(CON&&SC,HHVBARS(DIFF,N1)+1);

AA:=BACKSET(CON&&SC,REF(HHVBARS(DIFF,N1),N1)+N1+1);

DRAWLINE1(CROSS(AA=1,0.5),DIFF,CROSS(BB=1,0.5),DIFF,0),COLORGREEN;

DRAWTEXT(CROSS(BB=1,0.5),DIFF,'背离'),VALIGN0,COLORGREEN;

LL:=VALUEWHEN(CROSS(DIFF,DEA),DIFF),NODRAW;//B点DIFF值

LLM:=VALUEWHEN(CROSS(DIFF,DEA),MA5),NODRAW;//B叉点5均线值

LLC:=VALUEWHEN(CROSS(DIFF,DEA),C),NODRAW;//B叉点K收盘价

LL2:=REF(LL,N1),NODRAW;//A点DIFF值

LLM2:=REF(LLM,N1),NODRAW;//A点5均线值

LLC2:=REF(LLC,N1),NODRAW;//A点K收盘价

COM:=LL2<LL&&(LLM2>LLM||LLC2>LLC);

CC:=BACKSET(COM&&JC,LLVBARS(DIFF,N2)+1);

DD:=BACKSET(COM&&JC,REF(LLVBARS(DIFF,N2),N2)+N2+1);

DRAWLINE1(CROSS(DD=1,0.5),DIFF,CROSS(CC=1,0.5),DIFF,0),COLORRED;

DRAWTEXT(CROSS(CC=1,0.5),DIFF,'背离'),VALIGN0,COLORRED;

LC := REF(CLOSE,1);

BACKGROUNDSTYLE(1);

RSI1:SMA(MAX(CLOSE-LC,0),N1,1)/SMA(ABS(CLOSE-LC),N1,1)*100;

HWAVE:H>REF(H,1) && H>REF(H,2) && H>REFX(H,1) && H>REFX(H,2),NODRAW;

LWAVE:L<REF(L,1) && L<REF(L,2) && L<REFX(L,1) && L<REFX(L,2),NODRAW;

NH1:=SUMBARS(HWAVE,2)-1;

LH2:=SUMBARS(LWAVE,2)-1;

HH1:=REF(H,NH1);

LL1:=REF(L,LH2);

R1:=REF(RSI1,NH1);

S1:=REF(RSI1,LH2);

顶背离:HWAVE && H>HH1 && RSI1<R1,NODRAW;

底背离:LWAVE && L<LL1 && RSI1>S1,NODRAW;

DRAWTEXT(CROSS(顶背离,0.5),RSI1,'顶背离');

DRAWTEXT(CROSSDOWN(底背离,0.5),RSI1,'底背离');

G:=MA(C,5);

D:=MA(C,10);

NNH:=BARSLAST(H=HHV(H,7)) ,NODRAW;

NNL:=BARSLAST(L=LLV(L,7)) ,NODRAW;

//PD:=REF(G,NNH)>REF(D,NNH) ,NODRAW;

NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW;

N:=IF(ISLASTBAR AND NN>0,NN,5) ,NODRAW;

HH:=REF(H,N)=HHV(H,6);

LL:=REF(L,N)=LLV(L,6);

FG01:BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW;//只设置前面第6个

FD01:BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW;

FG02:=FG01=FD01 AND G>D,NODRAW;

FD02:FG01=FD01 AND G<D,NODRAW;

TTTT:BARSLAST(FD01),NODRAW;

FG0:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW;

FD0:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW;

GT:BARSLAST(FG0),NODRAW;

DT:BARSLAST(FD0),NODRAW;

LLLL:DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW;

FG1:BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW;

FD1:BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW;

FG11:IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW;

FD11:IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW;

//再次周期

GT1:BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW;

DT1:BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW;

FD2:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;

FG2A:BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW;

FG2B:IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW;

FG2:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;

FD2A:BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;

FD2B:IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW;

TTTTTT: H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW;

HHHHHH:REF(LLV(L,10),DT1),NODRAW;

//前长后短;

FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW;

FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW;

//前短后长,前低后高（去低）;

FD231:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW;

FG23:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW;

FG231:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW;

FD23:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW;

///前短后长，去3;

FDD23:REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW;

FD24:BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;

FG24:BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW;

GT2:BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW;

DT2:BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW;

FG3:BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW;

//HHX:REF(H,GT2),NODRAW;

FD3:BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW;

FG31:IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW;

FD31:IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW;

GT3:BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW;

DT3:BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW;

FG4:BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW;

FD4:BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW;

FG41:IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW;

FD41:IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW;

HHH:=GT3=0 AND FG31<>1 AND FG3<>1,NODRAW;

LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW;

//HHH:=FG0 AND FG11<>1 AND FG1<>1 AND FG2<>1 AND FG21<>1 AND FG31<>1 AND FG3<>1;

//LLL:=FD0 AND FD11<>1 AND FD1<>1 AND FD2<>1 AND FD21<>1 AND FD31<>1 AND FD3<>1;

DRAWICON(HHH,H,2),VALIGN2;

DRAWICON(LLL,L,1),VALIGN0;

技术人员回复

日期:2018-7-30 13:04

参考：