缠论指标怎么改 (文华财经WH8赢智V8.2)

投资者咨询：缠论指标怎么改 (文华财经WH8赢智V8.2)

来源:文华财经日期:2018-5-28 17:11

缠论指标怎么改成可以在WH8的盒子中运行，也就是说加入指令可以在盒子中运行，指令如下，谢谢

BD1:=LOW<=LLV(LOW,6) AND REFX(LOW,1)>=LOW AND REFX(LOW,2)>=LOW AND REFX(LOW,3)>=LOW AND REFX(LOW,4)>=LOW AND REFX(LOW,5)>=LOW ;//笔高，粗选//

BG1:= HIGH>=HHV(HIGH,6) AND REFX(HIGH,1)<=HIGH AND REFX(HIGH,2)<=HIGH AND REFX(HIGH,3)<=HIGH AND REFX(HIGH,4)<=HIGH AND REFX(HIGH,5)<=HIGH ;//笔低，粗选//

BDQ:=(REFX(BD1,1)=1 AND BARSLAST(BG1)>=3) OR (REFX(BD1,1)=1 AND COUNT(BD1,BARPOS)=0 AND COUNT(BG1,BARPOS)=0) ;

BDQ1:=(BDQ AND COUNT(BDQ,BARSLAST(BG1))=1) OR ( BARSSINCE(BDQ)=0);

BD2:=(BD1 AND BARSLAST(BG1)>3 AND LOW<=LLV(LOW,BARSLAST(BDQ1)) AND COUNT(BG1,BARSLAST(BDQ1))=0) OR (BD1 AND LOW<=LLV(LOW,BARSLAST(BDQ1)) AND COUNT(BG1,BARPOS)=0 );

BDDW:=BACKSET(BD2,BARSLAST(BDQ1));

//DRAWTEXT(BDDW,HIGH,?');

//DRAWTEXT((BDDW AND REFX(BDDW,1)=0),LOW*0.94,'第二低点');//

BD3:=(BDDW AND REFX(BDDW,1)=0) OR (BDDW AND ISLASTBAR) OR (BD1 AND BARSLAST(BG1)<4);//修改过，去除高低点在同一根//

//笔高前一根//

BGQ:=(REFX(BG1,1)=1 AND BARSLAST(BD1)>=3) OR (REFX(BG1,1)=1 AND COUNT(BD1,BARPOS)=0 AND COUNT(BG1,BARPOS)=0);

//DRAWTEXT(BGQ ,HIGH,'前')COL OR YELLOW;//测试低点//

BGQ1:=(BGQ AND COUNT(BGQ,BARSLAST(BD1))=1) OR ( BARSSINCE(BGQ)=0);

//DRAWTEXT(BGQ1 ,HIGH*1.03,'第一前')COL OR CYAN;//测试低点//

//新笔高//

BG2:=(BG1 AND BARSLAST(BD1)>3 AND HIGH>=HHV(HIGH,BARSLAST(BGQ1)) AND COUNT(BD1,BARSLAST(BGQ1))=0 ) OR (BG1 AND HIGH>=HHV(HIGH,BARSLAST(BGQ1)) AND COUNT(BD1,BARPOS)=0 );

BGDW:=BACKSET(BG2,BARSLAST(BGQ1));

//DRAWTEXT((BGDW AND REFX(BGDW,1)=0),HIGH*1.03,'第二高');//

BG3:=(BGDW AND REFX(BGDW,1)=0) OR (BGDW AND ISLASTBAR) OR (BG1 AND BARSLAST(BD1)<4) ;

//跟前面的笔高距离小于4，并且价格是最低的//

//笔低前一根//

BDQ30:=(REFX(BD1,1)=1 ) OR (REFX(BD1,1)=1 AND COUNT(BD1,BARPOS)=0 AND COUNT(BG1,BARPOS)=0) ;

BDQ130:=(BDQ30 AND COUNT(BDQ30,BARSLAST(BG1))=1) OR ( BARSSINCE(BDQ30)=0);

//DRAWTEXT(BDQ ,LOW*0.98,'前')COL OR YELLOW;//测试低点//

//DRAWTEXT(BDQ1,LOW*0.96,'第一前')COL OR CYAN;//测试低点//

//新BD2//

BD230:=(BD1 AND LOW<=LLV(LOW,BARSLAST(BDQ130)) AND COUNT(BG1,BARSLAST(BDQ130))=0 ) OR (BD1 AND LOW<=LLV(LOW,BARSLAST(BDQ130)) AND COUNT(BG1,BARPOS)=0 );

BDDW30:=BACKSET(BD230,BARSLAST(BDQ130));

BD4:=BDDW30 AND REFX(BDDW30,1)=0;

BD5:=BD3 OR (BD4 AND BARSLAST(BG1)<4 ) ;

//跟前面的笔低距离小于4，并且价格是最高的//

//笔高前一根//

BGQ30:=(REFX(BG1,1)=1 ) OR (REFX(BG1,1)=1 AND COUNT(BD1,BARPOS)=0 AND COUNT(BG1,BARPOS)=0);

//DRAWTEXT(BGQ ,HIGH,'前')COL OR YELLOW;//测试低点//

BGQ130:=(BGQ30 AND COUNT(BGQ30,BARSLAST(BD1))=1) OR ( BARSSINCE(BGQ30)=0);

//DRAWTEXT(BGQ1 ,HIGH*1.03,'第一前')COL OR CYAN;//测试低点//

//新笔高//

BG230:=(BG1 AND HIGH>=HHV(HIGH,BARSLAST(BGQ130)) AND COUNT(BD1,BARSLAST(BGQ130))=0) OR (BG1 AND HIGH>=HHV(HIGH,BARSLAST(BGQ130)) AND COUNT(BD1,BARPOS)=0 );

BGDW30:=BACKSET(BG230,BARSLAST(BGQ130));

BG4:=BGDW30 AND REFX(BGDW30,1)=0;

BG5:=BG3 OR (BG4 AND BARSLAST(BD1)<4) ;

//去掉绝对错误低点//

BD6:=(BD5 AND LOW>=REF(HIGH,BARSLAST(BG5)) ) ;//最低价大于前笔高//

BD7:= BD5 AND REFX(HIGH,1)>=REF(HIGH,BARSLAST(BG5)) ;//笔低后面一根最高价大于前高//

//DRAWTEXT(BD7,HIGH,'错误低点');//

BD:=BD5 AND BD6=0 AND BD7=0;

//去掉绝对错误高点//

BG6:=BG5 AND HIGH<=REF(LOW,BARSLAST(BD5));

BG7:=BG5 AND REFX(LOW,1)<=REF(LOW,BARSLAST(BD5)) ;

BG:= BG5 AND BG6=0 AND BG7=0;

JQD:=BARSLAST(BD);//距前低//

JQG:=BARSLAST(BG);//距前高//

//K线包含处理//

//前面顶部左侧K线第1根是否跟前一根重合//

DQBHGG:=(REF(LOW,JQG+1)<=REF(LOW,JQG+2) AND REF(HIGH,JQG+1)>=REF(HIGH,JQG+2)) OR (REF(LOW,JQG+1)>=REF(LOW,JQG+2) AND REF(HIGH,JQG+1)<=REF(HIGH,JQG+2));

//前面底部的左侧第一根K线是否跟前一根重合//

DDQQBBHH:=(REF(LOW,JQD+1)<=REF(LOW,JQD+2) AND REF(HIGH,JQD+1)>=REF(HIGH,JQD+2)) OR (REF(LOW,JQD+1)>=REF(LOW,JQD+2) AND REF(HIGH,JQD+1)<=REF(HIGH,JQD +2));

//当前位置左右侧跟前面高点点最高点是否包含判断//

ADQGYCA:=(REFX(LOW,1)<=REFX(LOW,2) AND REFX(HIGH,1)>=REFX(HIGH,2)) OR (REFX(LOW,1)>=REFX(LOW,2) AND REFX(HIGH,10000)<=REFX(HIGH,2));

KAKDZC:=(REF(LOW,1)<=REF(LOW,2) AND REF(HIGH,1)>=REF(HIGH,2)) OR (REF(LOW,1)>=REF(LOW,2) AND REF(HIGH,JQG+ 1)<=REF(HIGH,2));

BKDQDYC:=(REFX(LOW,1)<=REFX(LOW,2) AND REFX(HIGH,1)>=REFX(HIGH,2)) OR (REFX(LOW,1)>=REFX(LOW,2) AND REFX(HIGH,10000)<=REFX(HIGH,2));

JKDQDZCA:=(REF(LOW,1)<=REF(LOW,2) AND REF(HIGH,1)>=REF(HIGH,2)) OR (REF(LOW,1)>=REF(LOW,2) AND REF(HIGH,JQG+ 1)<=REF(HIGH,2));

//包含成立取最大值//

//按前面顺序//

DZD:=MIN(REF(HIGH,JQD +1),REF(HIGH,JQD+ 2));

GZD:=MAX(REF(LOW,JQG +1),REF(LOW,JQG+ 2));

DQGYC:=MAX(REFX(LOW,1),REFX(LOW,2) );//当前是顶分型，取低点最大值//

DQGZC:=MAX(REF(LOW,1),REF(LOW,2));

DQDYC:=MIN(REFX(HIGH,1),REFX(HIGH,2) );//当前是底分型，取高点最小值//

DQDZC:=MIN(REF(HIGH,1),REF(HIGH,2));

//高低点包含关系//

BBDQBH:=LOW<REF(LOW,JQG) AND LOW<REF(LOW,JQG +1) AND LOW<REF(LOW,JQG-1);

//顶分型底分型包含判断//

BDB:=(BD AND LOW<IFELSE(DQBHGG,GZD,REF(LOW,JQG +1)) AND REF(HIGH,JQG)>IFELSE(JKDQDZCA,DQDZC,REF(HIGH,1)) AND REF(HIGH,JQG)>IFELSE(BKDQDYC,DQDYC,REFX(HIGH,1)) AND LOW<REF(CLOSE,JQG +2) AND LOW<IFELSE((REF(HIGH,JQG)>=REF(HIGH,JQG +1) AND REF(LOW,JQG)<=REF(LOW,JQG +1)),REF(LOW,JQG +2),REF(LOW,JQG+ 1)) AND LOW<IFELSE(REF(HIGH,JQG)>=REF(HIGH,JQG-1) AND REF(LOW,JQG)<=REF(LOW,JQG-1),REF(LOW,JQG-2),REF(LOW,JQG-1)) AND REF(HIGH,JQG)>IFELSE(LOW<=REFX(LOW,1) AND HIGH>=REFX(HIGH,1) AND LOW<=REF(LOW,1) AND HIGH>=REF(HIGH,1),REFX(HIGH,2),REFX(HIGH,1))) OR (BARSSINCE(BD)=0 AND COUNT(BG ,BARPOS)=0) OR (BARSSINCE(BD)=0 AND COUNT(BG ,BARPOS)=1 AND BARSLAST(BG)>=4 AND LOW<REF(HIGH,BARSLAST(BG)) AND LOW<REF(LOW,BARSLAST(BG)-1) AND REF(HIGH,1)<REF(HIGH,BARSLAST(BG)) AND REFX(HIGH,1)<REF(HIGH,BARSLAST(BG)));

//当前底分型，最后一句包含缺口情况 AND LOW<REF(LOW,JQG)//

BGB:=(BG AND REF(LOW,JQD)<IFELSE(KAKDZC,DQGZC,REF(LOW,1)) AND HIGH>REF(CLOSE,JQD +2) AND HIGH>IFELSE(DDQQBBHH,DZD,REF(HIGH,JQD+ 1)) AND REF(LOW,JQD)<IFELSE(ADQGYCA,DQGYC,REFX(LOW,1)) AND HIGH>IFELSE(REF(LOW,JQD)<=REF(LOW,JQD+ 1) AND REF(HIGH,JQD)>REF(HIGH,JQD+ 1),REF(HIGH,JQD+ 2),REF(HIGH,JQD +1)) AND HIGH>IFELSE(REF(LOW,JQD)<=REF(LOW,JQD-1) AND REF(HIGH,JQD)>REF(HIGH,JQD-1),REF(HIGH,JQD-2),REF(HIGH,JQD-1)) AND REF(LOW,JQD)<IFELSE(HIGH>=REFX(HIGH,1) AND LOW<=REFX(LOW,1) AND HIGH>=REF(HIGH,1) AND LOW<=REF(LOW,1),REFX(LOW,2),REFX(LOW,1))) OR (BARSSINCE(BG)=0 AND COUNT(BD ,BARPOS)=0) OR (BARSSINCE(BG)=0 AND COUNT(BD ,BARPOS)=1 AND BARSLAST(BD)>=4 AND HIGH>REF(LOW,BARSLAST(BD)) AND HIGH>REF(HIGH,BARSLAST(BD)-1) AND REF(LOW,1)>REF(LOW,BARSLAST(BD)) AND REFX(LOW,1)>REF(LOW,BARSLAST(BD)));

//当前顶分型,最后一句是包含缺口情况 AND HIGH>REF(HIGH,JQD)//

//合并同向高低点//

JQD1:=BARSLAST(BDB);//距前低//

JQG1:=BARSLAST(BGB);//距前高//

//笔高前一根//

BBGQ:=(REFX(BGB,1)=1 AND BARSLAST(BDB)>=3 ) OR (REFX(BGB,1)=1 AND COUNT(BDB,BARPOS)=0 AND COUNT(BGB,BARPOS)=0);

//DRAWTEXT(BBGQ ,HIGH,'前')COL OR YELLOW;//测试低点//

BBGQ1:=(BBGQ AND COUNT(BBGQ,BARSLAST(BDB))=1) OR ( BARSSINCE(BBGQ)=0);

//DRAWTEXT(BBGQ1 ,HIGH*1.05,'第一前')COL OR CYAN;//测试低点//

//新笔高////合并高点，只合并到距离前低5根K线部分//

GG2:=(BGB AND BARSLAST(BDB)>3 AND HIGH>=HHV(HIGH,BARSLAST(BBGQ1)) AND COUNT(BDB,BARSLAST(BBGQ1))=0);

GG:=BACKSET(GG2,BARSLAST(BBGQ1));

//DRAWTEXT(GG,HIGH,?')COL OR YELLOW;//测试低点//

//DRAWTEXT((GG AND REFX(GG,1)=0),HIGH*1.03,'二高');//

XZBG1:=BGB AND BARSLAST(BDB)<4 ;//保留近高//

ZGD:=((GG AND REFX(GG,1)=0) OR XZBG1) OR (GG AND ISLASTBAR) OR (BARSSINCE(BGB)=0 AND COUNT(BDB,BARPOS)=0);//获取特殊高序列//

//新笔低//

//笔低前一根//

BBDQ:=(REFX(BDB,1)=1 AND BARSLAST(BGB)>=3) OR (REFX(BDB,1)=1 AND COUNT(BDB,BARPOS)=0 AND COUNT(BGB,BARPOS)=0);

BBDQ1:=(BBDQ AND COUNT(BBDQ,BARSLAST(BGB))=1) OR ( BARSSINCE(BBDQ)=0);

//DRAWTEXT(BBDQ ,LOW*0.98,'前')COL OR YELLOW;//测试低点//

//DRAWTEXT(BBDQ1,LOW*0.96,'第一前')COL OR CYAN;//测试低点//

//新BD2//

DD2:=(BDB AND BARSLAST(BGB)>3 AND LOW<=LLV(LOW,BARSLAST(BBDQ1)) AND COUNT(BGB,BARSLAST(BBDQ1))=0);

DD:=BACKSET(DD2,BARSLAST(BBDQ1));

//DRAWTEXT(DD,HIGH,?');

//DRAWTEXT((DD AND REFX(DD,1)=0),LOW*0.94,'第二低点');//

XZBD1:=BDB AND BARSLAST(BGB)<4;//保留近低//

ZDD:=((DD AND REFX(DD,1)=0) OR XZBD1) OR (DD AND ISLASTBAR) OR (BARSSINCE(BDB)=0 AND COUNT(BGB,BARPOS)=0);//获取特殊低序列//

//精选点//

//DRAWTEXT(ZGD,HIGH*1.03,'ZGD')COL OR WHITE DRAWABOVE;

//DRAWTEXT(ZDD,LOW*0.97,'ZDD')COL OR YELLOW DRAWABOVE;

//DRAWTEXT(BDB,LOW,'P低点')COL OR CYAN DRAWABOVE;

//DRAWTEXT(BGB,HIGH,'P高点')COL OR RED DRAWABOVE;

//定义特征高低点后的，顶分型和底分型//

FXD:=LOW<=REF(LOW,1) AND REFX(LOW,1)>=LOW AND REFX(LOW,2)>=LOW AND REFX(LOW,3)>=LOW AND REFX(LOW,4)>=LOW AND REFX(LOW,5)>=LOW ;

//DRAWTEXT(FXD,LOW,'FXD');

//出特征低点//

TZD:=BACKSET(ZDD AND BARSLAST(ZGD)<4 ,BARSLAST(ZGD));//特征低点向前赋值//

TZDD:=(TZD AND REFX(TZD,1)=0) OR (TZD AND ISLASTBAR);//定位特征低点//

//DRAWTEXT(TZDD,HIGH,'特征低点');//

TZG:=BACKSET(ZGD AND BARSLAST(ZDD)<4 ,BARSLAST(ZDD));

TZGG:=(TZG AND REFX(TZG,1)=0) OR (TZG AND ISLASTBAR);

ZQGD:= BARSSINCE(ZGD)=0 AND COUNT(ZDD,BARPOS)=0;

JZD:=(TZDD AND REF(TZGG,BARSLAST(ZGD))=0 AND REF(REF(TZDD,BARSLAST(ZDD)),1)=0) OR (TZDD AND REF(ZQGD,BARSLAST(ZGD)));

//出特征低点//

TZDQC:=BACKSET(JZD,BARSLAST(ZGD));//这地方等等再思考//

TZDDDDFZ:=(TZDQC AND REFX(TZDQC,1)=0) OR (TZDQC AND ISLASTBAR);

//DRAWTEXT(TZDDDDFZ,LOW*0.98,'去除低点')COL OR MAGENTA ;

//出符合条件底分型//

JQD9:=BARSLAST(ZDD);//距前低//

JQG9:=BARSLAST(ZGD);//距前高//

//K线包含处理//

//前面顶部左侧K线第1根是否跟前一根重合//

DQBHGG9:=(REF(LOW,JQG9 +1)<=REF(LOW,JQG9 +2) AND REF(HIGH,JQG9+ 1)>=REF(HIGH,JQG9+ 2)) OR (REF(LOW,JQG9 +1)>=REF(LOW,JQG9 +2) AND REF(HIGH,JQG9 +1)<=REF(HIGH,JQG9+ 2));

//前面底部的左侧第一根K线是否跟前一根重合//

DDQQBBHH9:=(REF(LOW,JQD9+ 1)<=REF(LOW,JQD9+ 2) AND REF(HIGH,JQD9 +1)>=REF(HIGH,JQD9 +2)) OR (REF(LOW,JQD9+ 1)>=REF(LOW,JQD9+ 2) AND REF(HIGH,JQD9+ 1)<=REF(HIGH,JQD9+ 2));

//当前位置左右侧跟前面高点点最高点是否包含判断//

ADQGYCA9:=(REFX(LOW,1)<=REFX(LOW,2) AND REFX(HIGH,1)>=REFX(HIGH,2)) OR (REFX(LOW,1)>=REFX(LOW,2) AND REFX(HIGH,10000)<=REFX(HIGH,2));

KAKDZC9:=(REF(LOW,1)<=REF(LOW,2) AND REF(HIGH,1)>=REF(HIGH,2)) OR (REF(LOW,1)>=REF(LOW,2) AND REF(HIGH,JQG9 +1)<=REF(HIGH,2));

BKDQDYC9:=(REFX(LOW,1)<=REFX(LOW,2) AND REFX(HIGH,1)>=REFX(HIGH,2)) OR (REFX(LOW,1)>=REFX(LOW,2) AND REFX(HIGH,10000)<=REFX(HIGH,2));

JKDQDZCA9:=(REF(LOW,1)<=REF(LOW,2) AND REF(HIGH,1)>=REF(HIGH,2)) OR (REF(LOW,1)>=REF(LOW,2) AND REF(HIGH,JQG9+ 1)<=REF(HIGH,2));

//包含成立取最大值//

//按前面顺序//

DZD9:=MIN(REF(HIGH,JQD9+ 1),REF(HIGH,JQD9+ 2));

GZD9:=MAX(REF(LOW,JQG9 +1),REF(LOW,JQG9+ 2));

DQGYC9:=MAX(REFX(LOW,1),REFX(LOW,2) );//当前是顶分型，取低点最大值//

DQGZC9:=MAX(REF(LOW,1),REF(LOW,2));

DQDYC9:=MIN(REFX(HIGH,1),REFX(HIGH,2) );//当前是底分型，取高点最小值//

DQDZC9:=MIN(REF(HIGH,1),REF(HIGH,2));

//高低点包含关系//

BBDQBH9:=LOW<REF(LOW,JQG9) AND LOW<REF(LOW,JQG9 +1) AND LOW<REF(LOW,JQG9-1);

//出特征低点后符合条件的底分型//

FHFXD:= BARSLAST(ZDD)<BARSLAST(ZGD) AND BARSLAST(ZGD)>=4 AND FXD AND COUNT(ZDD,BARSLAST(ZGD))=1 AND REF(TZDDDDFZ,BARSLAST(ZDD)) AND HIGH<REF(HIGH,BARSLAST(ZGD));

//DRAWTEXT(FHFXD,LOW,'底分型')COL OR RED;

//顶分型底分型包含判断//

BDB9:=(FHFXD AND LOW<IFELSE(DQBHGG9,GZD9,REF(LOW,JQG9 +1)) AND REF(HIGH,JQG9)>IFELSE(JKDQDZCA9,DQDZC9,REF(HIGH,1)) AND REF(HIGH,JQG9)>IFELSE(BKDQDYC9,DQDYC9,REFX(HIGH,1)) AND LOW<REF(CLOSE,JQG9 +2) AND LOW<REF(LOW,JQG9-1) AND LOW<IFELSE((REF(HIGH,JQG9)>=REF(HIGH,JQG9+ 1) AND REF(LOW,JQG9)<=REF(LOW,JQG9+ 1)),REF(LOW,JQG9+ 2),REF(LOW,JQG9 +1)) AND LOW<IFELSE(REF(HIGH,JQG9)>=REF(HIGH,JQG9-1) AND REF(LOW,JQG9)<=REF(LOW,JQG9-1),REF(LOW,JQG9-2),REF(LOW,JQG9-1)) AND REF(HIGH,JQG9)>IFELSE(LOW<=REFX(LOW,1) AND HIGH>=REFX(HIGH,1) AND LOW<=REF(LOW,1) AND HIGH>=REF(HIGH,1),REFX(HIGH,2),REFX(HIGH,1)) ); //当前底分型，最后一句包含缺口情况 AND LOW<REF(LOW,JQG)//

//DRAWTEXT(BDB9,LOW*0.98,'底分型')COL OR YELLOW;

//定位第一个底分型//

//定位底分型左边一根//

DFXZC1:=REFX(BDB9,1)=1 ;

DFXZC:=DFXZC1 AND COUNT(DFXZC1,BARSLAST(ZGD))=1;

//DRAWTEXT(BARSNEXT(BDB9)=1,LOW,'前')COL OR RED;

//DRAWTEXT(DFXZC,HIGH,'第一前')COL OR GREEN;//

DWDFXZCFZ:=BACKSET(BDB9 AND LOW<=LLV(LOW,BARSLAST(DFXZC)) AND COUNT(ZGD,BARSLAST(DFXZC))=0,BARSLAST(DFXZC));

DWDYZC:=DWDFXZCFZ AND REFX(DWDFXZCFZ,1)=0;

//DRAWTEXT(DWDYZC,LOW*0.95,'Z底分型')COL OR CYAN;//

TZDQCHD1:=((ZDD AND TZDDDDFZ=0) OR DWDYZC) OR (DWDFXZCFZ AND ISLASTBAR) OR (BARSSINCE(ZDD)=0 AND COUNT(ZGD,BARPOS)=0);

//特征低去除后低点，产生新低点序列记为TZDQCHD//

//DRAWTEXT(TZDQCHD1,LOW*0.95,'新低序列')COL OR RED;//

//合并低点//

DDQ:=(REFX(TZDQCHD1,1)=1 ) OR (REFX(TZDQCHD1,1)=1 AND COUNT(ZGD,BARPOS)=0 AND COUNT(TZDQCHD1,BARPOS)=0);

//DRAWTEXT(DDQ,LOW,'前');

DDQ1:=(DDQ AND COUNT(DDQ,BARSLAST(ZGD))=1) OR (BARSSINCE(DDQ)=0);

//DRAWTEXT(DDQ1,LOW*0.98,'第一前')COL OR CYAN;//

TZDCJDW:=BACKSET(TZDQCHD1 AND LOW<=LLV(LOW,BARSLAST(DDQ1)) AND COUNT(ZGD,BARSLAST(DDQ1))=0,BARSLAST(DDQ1));

//DRAWTEXT(TZDCJDW ,HIGH,?')COL OR GREEN;//

TZDQCHD:=(TZDCJDW AND REFX(TZDCJDW,1)=0) OR (TZDCJDW AND ISLASTBAR);

//验证//

//DRAWTEXT(TZDQCHD,LOW*0.98,'新低') ;

//合并高点//

GDQQ:=(REFX(ZGD,1)=1 ) OR (REFX(ZGD,1)=1 AND COUNT(ZGD,BARPOS)=0 AND COUNT(TZDQCHD,BARPOS)=0);//高点前一根//

GDQQ1:=(GDQQ AND COUNT(GDQQ,BARSLAST(TZDQCHD))=1) OR (BARSSINCE(GDQQ)=0);

FZXGD:=BACKSET(ZGD AND HIGH>=HHV(HIGH,BARSLAST(GDQQ1)) AND COUNT(TZDQCHD,BARSLAST(GDQQ1))=0 ,BARSLAST(GDQQ1) );//赋值新高点，合并,修改过，添加COUNT(ZDD,BARSLAST(GDQQ1))=0//

//验证//

//DRAWTEXT(FZXGD,HIGH,?');

//DRAWTEXT(GDQQ,HIGH,'前')COL OR MAGENTA;

//DRAWTEXT(GDQQ1,HIGH*0.95,'第一前')COL OR CYAN;//

//合并低点后形成的新高点//

TZDQCHG:=((FZXGD AND REFX(FZXGD,1)=0)) OR (FZXGD AND ISLASTBAR) ;

//DRAWTEXT(TZDQCHG,HIGH,'新高') ;

//出特征高点//

TZD1:=BACKSET(TZDQCHD AND BARSLAST(TZDQCHG)<4 ,BARSLAST(TZDQCHG));//标记特征低点//

TZDD1:=(TZD1 AND REFX(TZD1,1)=0) OR (TZD1 AND ISLASTBAR);//区分特征低点序列//

TZG1:=BACKSET(TZDQCHG AND BARSLAST(TZDQCHD)<4 ,BARSLAST(TZDQCHD));//标记特征高点//

TZGG1:=(TZG1 AND REFX(TZG1,1)=0) OR (TZG1 AND ISLASTBAR);//区分特征高点序列//

ZQDD:=ZDD AND COUNT(ZGD,BARPOS)=0;//最前低点//

JZG1:=(TZGG1 AND REF(TZDD1,BARSLAST(TZDQCHD))=0 AND REF(REF(TZGG1,BARSLAST(TZDQCHG)),1)=0) OR (TZGG1 AND REF(ZQDD,BARSLAST(TZDQCHD)));

//出特征高点//

TZGQC1:=BACKSET(JZG1,BARSLAST(TZDQCHD));//去除特征高//

TZGQCFZ:=(TZGQC1 AND REFX(TZGQC1,1)=0) OR (TZGQC1 AND ISLASTBAR);//标记定位特征高//

//DRAWTEXT(TZGQCFZ,HIGH*1.05,'去除高点')COL OR MAGENTA;

//定义顶分型//

FXG:= HIGH>=REF(HIGH,1) AND REFX(HIGH,1)<=HIGH;

//出符合条件底分型//

JQD10:=BARSLAST(TZDQCHD);//距前低//

JQG10:=BARSLAST(TZDQCHG);//距前高//

//K线包含处理//

//前面顶部左侧K线第1根是否跟前一根重合//

DQBHGG10:=(REF(LOW,JQG10+ 1)<=REF(LOW,JQG10 +2) AND REF(HIGH,JQG10 +1)>=REF(HIGH,JQG10+ 2)) OR (REF(LOW,JQG10 +1)>=REF(LOW,JQG10 +2) AND REF(HIGH,JQG10+ 1)<=REF(HIGH,JQG10+ 2));

//前面底部的左侧第一根K线是否跟前一根重合//

DDQQBBHH10:=(REF(LOW,JQD10 +1)<=REF(LOW,JQD10 +2) AND REF(HIGH,JQD10 +1)>=REF(HIGH,JQD10 +2)) OR (REF(LOW,JQD10 +1)>=REF(LOW,JQD10 +2) AND REF(HIGH,JQD10 +1)<=REF(HIGH,JQD10+ 2));

//当前位置左右侧跟前面高点点最高点是否包含判断//

ADQGYCA10:=(REFX(LOW,1)<=REFX(LOW,2) AND REFX(HIGH,1)>=REFX(HIGH,2)) OR (REFX(LOW,1)>=REFX(LOW,2) AND REFX(HIGH,10000)<=REFX(HIGH,2));

KAKDZC10:=(REF(LOW,1)<=REF(LOW,2) AND REF(HIGH,1)>=REF(HIGH,2)) OR (REF(LOW,1)>=REF(LOW,2) AND REF(HIGH,JQG10 +1)<=REF(HIGH,2));

BKDQDYC10:=(REFX(LOW,1)<=REFX(LOW,2) AND REFX(HIGH,1)>=REFX(HIGH,2)) OR (REFX(LOW,1)>=REFX(LOW,2) AND REFX(HIGH,10000)<=REFX(HIGH,2));

JKDQDZCA10:=(REF(LOW,1)<=REF(LOW,2) AND REF(HIGH,1)>=REF(HIGH,2)) OR (REF(LOW,1)>=REF(LOW,2) AND REF(HIGH,JQG10 +1)<=REF(HIGH,2));

//包含成立取最大值//

//按前面顺序//

DZD10:=MIN(REF(HIGH,JQD10 +1),REF(HIGH,JQD10+ 2));

GZD10:=MAX(REF(LOW,JQG10 +1),REF(LOW,JQG10 +2));

DQGYC10:=MAX(REFX(LOW,1),REFX(LOW,2) );//当前是顶分型，取低点最大值//

DQGZC10:=MAX(REF(LOW,1),REF(LOW,2));

DQDYC10:=MIN(REFX(HIGH,1),REFX(HIGH,2) );//当前是底分型，取高点最小值//

DQDZC10:=MIN(REF(HIGH,1),REF(HIGH,2));

//高低点包含关系//

BBDQBH10:=LOW<REF(LOW,JQG10) AND LOW<REF(LOW,JQG10+ 1) AND LOW<REF(LOW,JQG10-1);

//出特征高点后符合条件的顶分型//

FHFXG:= BARSLAST(TZDQCHD)>BARSLAST(TZDQCHG) AND BARSLAST(TZDQCHD)>=4 AND FXG AND COUNT(TZDQCHG,BARSLAST(TZDQCHD))=1 AND REF(TZGQCFZ,BARSLAST(TZDQCHG)) AND HIGH>REF(HIGH,BARSLAST(TZDQCHD));

//DRAWTEXT(FHFXG,HIGH*1.03,'顶分型')COL OR YELLOW;

//顶分型底分型包含判断//

BGB10:=(FHFXG AND HIGH>IFELSE(DDQQBBHH10,DZD10,REF(HIGH,JQD10+ 1)) AND REF(LOW,JQD10)<IFELSE(ADQGYCA10,DQGYC10,REFX(LOW,1)) AND REF(LOW,JQD10)<IFELSE(KAKDZC10,DQGZC10,REF(LOW,1)) AND HIGH>REF(CLOSE,JQD10 +2) AND HIGH>IFELSE(REF(LOW,JQD10)<=REF(LOW,JQD10 +1) AND REF(HIGH,JQD10)>REF(HIGH,JQD10+ 1),REF(HIGH,JQD10 +2),REF(HIGH,JQD10 +1)) AND HIGH>IFELSE(REF(LOW,JQD10)<=REF(LOW,JQD10-1) AND REF(HIGH,JQD10)>REF(HIGH,JQD10-1),REF(HIGH,JQD10-2),REF(HIGH,JQD10-1)) AND REF(LOW,JQD10)<IFELSE(HIGH>=REFX(HIGH,1) AND LOW<=REFX(LOW,1) AND HIGH>=REF(HIGH,1) AND LOW<=REF(LOW,1),REFX(LOW,2),REFX(LOW,1)));//当前顶分型,最后一句是包含缺口情况 AND HIGH>REF(HIGH,JQD)//

//DRAWTEXT(BGB10,HIGH,'顶分型')COL OR RED;//

//定位顶分型左边一根//

GFXZC1:=REFX(BGB10,1)=1;

GFXZC:=GFXZC1 AND COUNT(GFXZC1,BARSLAST(TZDQCHG))=1;

//赋值第一个CFXZC//

//DRAWTEXT(BARSNEXT(BGB10)=1 ,LOW,'前')COL OR RED;

//DRAWTEXT(GFXZC,HIGH,'第一前')COL OR GREEN;//

DWGFXZCFZ:=BACKSET(BGB10 AND HIGH>=HHV(HIGH,BARSLAST(GFXZC)) AND COUNT(TZDQCHD,BARSLAST(GFXZC))=0,BARSLAST(GFXZC));

//DRAWTEXT(DWGFXZCFZ,HIGH,?');//

DWDYGZC:=(DWGFXZCFZ AND REFX(DWGFXZCFZ,1)=0) OR (DWGFXZCFZ AND ISLASTBAR);

//DRAWTEXT(DWDYGZC,HIGH*1.03,'Z顶分型')COL OR CYAN;//

TZGQCHGG1:=((TZDQCHG AND TZGQCFZ=0) OR DWDYGZC) OR (BARSSINCE(ZGD)=0 AND COUNT(TZDQCHD,BARPOS)=0);//特征高去除后低点，产生新高点序列记为TZGQCHG1//;

//验证//

//DRAWTEXT(TZDQCHG AND TZGQCFZ=0,HIGH,'高点')COL OR MAGENTA;//

//合并高点//

ZZGQ:=REFX(TZGQCHGG1,1)=1;

ZZGQ1:=(ZZGQ AND COUNT(ZZGQ,BARSLAST(TZDQCHD))=1) OR (BARSSINCE(ZZGQ)=0);

TZGDZZFZ:=BACKSET(TZGQCHGG1 AND HIGH>=HHV(HIGH,BARSLAST(ZZGQ1)) AND COUNT(TZDQCHD,BARSLAST(ZZGQ1))=0,BARSLAST(ZZGQ1));

//验证//

//DRAWTEXT(ZZGQ,HIGH,'前')COL OR MAGENTA;

//DRAWTEXT(ZZGQ1,HIGH*0.95,'第一前')COL OR CYAN;//

TZGQCHG1:=(TZGDZZFZ AND REFX(TZGDZZFZ,1)=0) OR (TZGDZZFZ AND ISLASTBAR) OR (BARSSINCE(TZGQCHGG1)=0 AND COUNT(TZDQCHD,BARPOS)=0);

//最新高//

//DRAWTEXT(TZGQCHG1,HIGH*0.98,'新高')COL OR MAGENTA;//

//合并低点//

ZZDDQ:=REFX(TZDQCHD,1)=1;//相对上一新高点，合并低点，定义新低点//

ZZDDQ1:=(ZZDDQ AND COUNT(ZZDDQ,BARSLAST(TZGQCHG1))=1) OR (BARSSINCE(ZZDDQ)=0);

FZXDD1:=BACKSET(TZDQCHD AND LOW<=LLV(LOW,BARSLAST(ZZDDQ1)) AND COUNT(TZGQCHG1,BARSLAST(ZZDDQ1))=0 ,BARSLAST(ZZDDQ1));//赋值新高点，合并//

//验证//

//DRAWTEXT(ZZDDQ,HIGH,'前')COL OR MAGENTA;

//DRAWTEXT(ZZDDQ1,HIGH*0.95,'第一前')COL OR CYAN;//

TZGQCHD1:=(FZXDD1 AND REFX(FZXDD1,1)=0) OR (FZXDD1 AND ISLASTBAR) OR (BARSSINCE(TZDQCHD)=0 AND COUNT(TZGQCHG1,BARPOS)=0);//合并低点后形成的新低点//

//再次去除特征高低点//

BBD:=TZGQCHD1;

BBG:=TZGQCHG1;

C1:=BBG OR BBD;

POLYLINE( C1,IFELSE(BBD,LOW,HIGH) , IFELSE(BBD,COLORRED, COLORGREEN) ) ,POINTDOT;

技术人员回复

日期:2018-5-28 17:25

缠论是看盘使用的指标，指标的编写使用了未来函数

未来函数会造成信号忽闪，是不能作为程序化开平条件的，建议您调整下思路

您现在是从看盘转化为程序化，需要从思维上来摒弃掉之前的看盘思路

更建议您在网上搜索多了解程序化经典思路，对您日后模型开发也会很有帮助的

投资者咨询：缠论指标怎么改 (文华财经WH8赢智V8.2)

来源:文华财经日期:2018-5-28 17:11

好的，谢谢！

{{userData.name}}已认证

缠论指标怎么改 (文华财经WH8赢智V8.2)

期货技术

高手榜

期货手续费

期权手续费

期货行情

期货全档行情