[求助]请老师修改蝴蝶指标 (文华财经随身行iPhone 5.3.8)

投资者咨询：[求助]请老师修改蝴蝶指标 (文华财经随身行iPhone 5.3.8)

来源:文华财经日期:2017-10-31 8:58

Inputs:

Length(100),

Strength(8),

Tolerance(0.10),

BullColor(Blue),

BearColor(Red);

Variables:

F1(0.618),

F2(0.786),

F3(1.27),

F4(1.618),

P1Bar(-1),

P2Bar(-1),

T1Bar(-1),

T2Bar(-1),

P1(0.0),

P2(0.0),

T1(0.0),

T2(0.0),

PTValid(False),

HLValid(False),

InZone(False),

GD(0.0),

XA(0.0),

AB(0.0),

BC(0.0),

CD(0.0),

AD(0.0),

C1(False),

C2(False),

C3(False),

C4(False),

ABdXA(0.0),

BCdAB(0.0),

CDdBC(0.0),

ADdXA(0.0),

TL1(-1),

TL2(-1),

TL3(-1),

TL4(-1),

TL5(-1),

TL6(-1);

P1Bar = SwingHighBar(1, High, Strength, Length);

P2Bar = SwingHighBar(2, High, Strength, Length);

T1Bar = SwingLowBar(1, Low, Strength, Length);

T2Bar = SwingLowBar(2, Low, Strength, Length);

If P1Bar <> -1 and

P2Bar <> -1 and

T1Bar <> -1 and

T2Bar <> -1 Then Begin

{Test for a bullish 222}

{Trough X is T2}

T2 = Low[T2Bar];

{Peak A is P2}

P2 = High[P2Bar];

{Trough B is T1}

T1 = Low[T1Bar];

{Peak C is P1}

P1 = High[P1Bar];

{D is the buy point}

GD = Low;

PTValid = P1Bar < T1Bar and T1Bar < P2Bar and P2Bar < T2Bar;

HLValid = P1 < P2 and T1 > T2 and P1 > T1;

InZone = GD < T1 and GD > T2 and P2 >= Highest(High, T2Bar);

If PTValid and HLValid and InZone Then Begin

XA = P2 - T2;

AB = P2 - T1;

BC = P1 - T1;

CD = P1 - GD;

AD = P2 - GD;

ABdXA = AB / XA; {AB should be 61.8% of XA}

C1 = ABdXA > F1 - Tolerance and ABdXA < F1 + Tolerance;

BCdAB = BC / AB; {BC should be 61.8-78.6% of AB}

C2 = BCdAB > F1 - Tolerance and BCdAB < F2 + Tolerance;

CDdBC = CD / BC; {CD should be 127-161.8% of BC}

C3 = CDdBC > F3 - Tolerance and CDdBC < F4 + Tolerance;

ADdXA = AD / XA; {AD should be 78.6% of XA}

C4 = ADdXA > F2 - Tolerance and ADdXA < F2 + Tolerance;

If C1 and C2 and C3 and C4 Then Begin

TL1 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date[P2Bar], Time[P2Bar], P2);

If TL1 >= 0 Then Begin

TL_SetColor(TL1, BullColor);

TL_SetStyle(TL1, Tool_Solid);

TL_SetSize(TL1, 2);

End;

TL2 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date[T1Bar], Time[T1Bar], T1);

If TL2 >= 0 Then Begin

TL_SetColor(TL2, BullColor);

TL_SetStyle(TL2, Tool_Solid);

TL_SetSize(TL2, 2);

End;

TL3 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date[P1Bar], Time[P1Bar], P1);

If TL3 >= 0 Then Begin

TL_SetColor(TL3, BullColor);

TL_SetStyle(TL3, Tool_Solid);

TL_SetSize(TL3, 2);

End;

TL4 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date, Time, GD);

If TL4 >= 0 Then Begin

TL_SetColor(TL4, BullColor);

TL_SetStyle(TL4, Tool_Solid);

TL_SetSize(TL4, 2);

End;

TL5 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date, Time, GD);

If TL5 >= 0 Then Begin

TL_SetColor(TL5, BullColor);

TL_SetStyle(TL5, Tool_Dotted);

End;

TL6 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date, Time, GD);

If TL6 >= 0 Then Begin

TL_SetColor(TL6, BullColor);

TL_SetStyle(TL6, Tool_Dotted);

End;

{Test for a bearish 222}

{Peak X is P2}

{Trough A is T2}

{Peak B is P1}

{Trough C is T1}

{GD is the short point}

GD = High;

PTValid = T1Bar < P1Bar and P1Bar < T2Bar and T2Bar < P2Bar;

HLValid = T1 > T2 and P1 < P2 and T1 < P1;

InZone = GD > P1 and GD < P2 and T2 <= Lowest(Low, P2Bar);

If PTValid and HLValid and InZone Then Begin

XA = P2 - T2;

AB = P1 - T2;

BC = P1 - T1;

CD = GD - T1;

AD = GD - T2;

ABdXA = AB / XA; {AB should be 61.8% of XA}

C1 = ABdXA > F1 - Tolerance and ABdXA < F1 + Tolerance;

BCdAB = BC / AB; {BC should be 61.8-78.6% of AB}

C2 = BCdAB > F1 - Tolerance and BCdAB < F2 + Tolerance;

CDdBC = CD / BC; {CD should be 127-161.8% of BC}

C3 = CDdBC > F3 - Tolerance and CDdBC < F4 + Tolerance;

ADdXA = AD / XA; {AD should be 78.6% of XA}

C4 = ADdXA > F2 - Tolerance and ADdXA < F2 + Tolerance;

If C1 and C2 and C3 and C4 Then Begin

TL1 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date[T2Bar], Time[T2Bar], T2);

If TL1 >= 0 Then Begin

TL_SetColor(TL1, BearColor);

TL_SetStyle(TL1, Tool_Solid);

TL_SetSize(TL1, 2);

End;

TL2 = TL_New(Date[T2Bar], Time[T2Bar], T2, Date[P1Bar], Time[P1Bar], P1);

If TL2 >= 0 Then Begin

TL_SetColor(TL2, BearColor);

TL_SetStyle(TL2, Tool_Solid);

TL_SetSize(TL2, 2);

End;

TL3 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date[T1Bar], Time[T1Bar], T1);

If TL3 >= 0 Then Begin

TL_SetColor(TL3, BearColor);

TL_SetStyle(TL3, Tool_Solid);

TL_SetSize(TL3, 2);

End;

TL4 = TL_New(Date[T1Bar], Time[T1Bar], T1, Date, Time, GD);

If TL4 >= 0 Then Begin

TL_SetColor(TL4, BearColor);

TL_SetStyle(TL4, Tool_Solid);

TL_SetSize(TL4, 2);

End;

TL5 = TL_New(Date[P1Bar], Time[P1Bar], P1, Date, Time, GD);

If TL5 >= 0 Then Begin

TL_SetColor(TL5, BearColor);

TL_SetStyle(TL5, Tool_Dotted);

End;

TL6 = TL_New(Date[P2Bar], Time[P2Bar], P2, Date, Time, GD);

If TL6 >= 0 Then Begin

TL_SetColor(TL6, BearColor);

TL_SetStyle(TL6, Tool_Dotted);

End;

Wealth-Lab code:

procedure Gartley222

(

VPFactor: float;

Tolerance: float;

Lookback: integer;

HoldBars: integer;

VolMin: integer

);

begin

var ATRValue, VP, Reversal: float;

var F1, F2, F3, F4, P1, P2, T1, T2: float;

var Bar, P1Bar, P2Bar, T1Bar, T2Bar, p: integer;

var XA, AB, BC, CD, AD, D, XD, DT, ABdXA, BCdAB, CDdBC, ADdXA: float;

var PTValid, HLValid, InZone, C1, C2, C3, C4: boolean;

var BT, BS, ST, SS: float;

{Fibonacci Constants}

F1 := 0.618;

F2 := 0.786;

F3 := 1.27;

F4 := 1.618;

InstallTimeBasedExit(HoldBars);

for Bar := Lookback to BarCount() - 1 do

begin

ApplyAutoStops(Bar);

ATRValue := ATR(Bar, Lookback);

SetShareSize( 1000 * Int( 10 / ATRValue ) );

VP := 100 * ATRValue / PriceClose(Bar);

{Find peaks and troughs}

Reversal := Int(VPFactor * VP);

P1 := Peak(Bar, #High, F1 * Reversal);

P1Bar := PeakBar(Bar, #High, F1 * Reversal);

P2 := Peak(P1Bar, #High, Reversal);

P2Bar := PeakBar(P1Bar, #High, Reversal);

T1 := Trough(Bar, #Low, F1 * Reversal);

T1Bar := TroughBar(Bar, #Low, F1 * Reversal);

T2 := Trough(T1Bar, #Low, Reversal);

T2Bar := TroughBar(T1Bar, #Low, Reversal);

{Test for a bullish 222}

{Trough X is T2}

{Peak A is P2}

{Trough B is T1}

{Peak C is P1}

{D is the buy zone}

D := PriceLow(Bar);

PTValid := (P1Bar > T1Bar) and (T1Bar > P2Bar) and (P2Bar > T2Bar);

HLValid := (P1 < P2) and (T1 > T2) and (P1 > T1);

InZone := (D < T1) and (D > T2);

if (MarketPosition = 0) and

(SMA(Bar, #Volume, Lookback) >= VolMin) and

(PTValid) and (HLValid) and (InZone) then

begin

XA := P2 - T2;

AB := P2 - T1;

BC := P1 - T1;

XD := P2 - (F2 * XA);

CD := P1 - XD;

AD := P2 - XD;

ABdXA := AB / XA; {AB should be 61.8% of XA}

C1 := (ABdXA > F1 - Tolerance) and (ABdXA < F1 + Tolerance);

BCdAB := BC / AB; {BC should be 61.8-78.6% of AB}

C2 := (BCdAB > F1 - Tolerance) and (BCdAB < F2 + Tolerance);

CDdBC := CD / BC; {CD should be 127-161.8% of BC}

C3 := (CDdBC > F3 - Tolerance) and (CDdBC < F4 + Tolerance);

ADdXA := AD / XA; {AD should be 78.6% of XA}

C4 := (ADdXA > F2 - Tolerance) and (ADdXA < F2 + Tolerance);

if C1 and C2 and C3 and C4 then

begin

DrawLine(P2Bar, P2, T2Bar, T2, 0, #Blue, #Solid);

DrawLine(T1Bar, T1, P2Bar, P2, 0, #Blue, #Solid);

DrawLine(P1Bar, P1, T1Bar, T1, 0, #Blue, #Solid);

DrawLine(Bar, D, P1Bar, P1, 0, #Blue, #Solid);

DrawLine(Bar, D, T1Bar, T1, 0, #Blue, #Dotted);

DrawLine(Bar, D, T2Bar, T2, 0, #Blue, #Dotted);

AnnotateBar('B', Bar, True, #Blue, 10);

BuyAtLimit(Bar, XD, 'G222 LE');

DT := F1 * CD;

BT := XD + DT;

BS := T2;

end;

{Test for a bearish 222}

{Peak X is P2}

{Trough A is T2}

{Peak B is P1}

{Trough C is T1}

{D is the short zone}

D := PriceHigh(Bar);

PTValid := (T1Bar > P1Bar) and (P1Bar > T2Bar) and (T2Bar > P2Bar);

HLValid := (T1 > T2) and (P1 < P2) and (T1 < P1);

InZone := (D > P1) and (D < P2);

if (MarketPosition = 0) and

(PriceClose( Bar ) >= 5) and

(SMA(Bar, #Volume, Lookback) >= VolMin) and

(PTValid) and (HLValid) and (InZone) then

begin

XA := P2 - T2;

AB := P1 - T2;

BC := P1 - T1;

XD := T2 + (F2 * XA);

CD := XD - T1;

AD := XD - T2;

ABdXA := AB / XA; {AB should be 61.8% of XA}

C1 := (ABdXA > F1 - Tolerance) and (ABdXA < F1 + Tolerance);

BCdAB := BC / AB; {BC should be 61.8-78.6% of AB}

C2 := (BCdAB > F1 - Tolerance) and (BCdAB < F2 + Tolerance);

CDdBC := CD / BC; {CD should be 127-161.8% of BC}

C3 := (CDdBC > F3 - Tolerance) and (CDdBC < F4 + Tolerance);

ADdXA := AD / XA; {AD should be 78.6% of XA}

C4 := (ADdXA > F2 - Tolerance) and (ADdXA < F2 + Tolerance);

if C1 and C2 and C3 and C4 then

begin

DrawLine(T2Bar, T2, P2Bar, P2, 0, #Red, #Solid);

DrawLine(P1Bar, P1, T2Bar, T2, 0, #Red, #Solid);

DrawLine(T1Bar, T1, P1Bar, P1, 0, #Red, #Solid);

DrawLine(Bar, D, T1Bar, T1, 0, #Red, #Solid);

DrawLine(Bar, D, P1Bar, P1, 0, #Red, #Dotted);

DrawLine(Bar, D, P2Bar, P2, 0, #Red, #Dotted);

AnnotateBar('S', Bar, False, #Red, 10);

ShortAtLimit(Bar, XD, 'G222 SE');

DT := F1 * CD;

ST := XD - DT;

SS := P2;

end;

if LastPositionActive then

begin

if MarketPosition = 1 then begin

SellAtLimit(Bar+1, BT, #All, 'G222 LX+');

SellAtStop(Bar+1, BS, #All, 'G222 LX-');

end;

if MarketPosition = -1 then begin

CoverAtLimit(Bar+1, ST, #All, 'G222 LX+');

CoverAtStop(Bar+1, SS, #All, 'G222 LX-');

end;

Gartley222(2.0, 0.1, 20, 7, 2000000);

技术人员回复

日期:2017-10-31 9:25

模型需要研究一下，请您耐心等待，预计周五前回复

投资者咨询：[求助]请老师修改蝴蝶指标 (文华财经随身行iPhone 5.3.8)

来源:文华财经日期:2017-10-31 8:58

老师今天能给修改一下吗？谢谢

技术人员回复

日期:2017-11-3 10:07

您代码和文华差异很大，您模型用了自定义函数而且PEAK TROUGH等之字转向的未来函数支持参数为变量，以及支持未来函数和交易指令连用

这些文华都不支持，建议您把您模型思路上传，我们看下如何给您编写出来

另外您模型源码有一定程序化思路，不适合在WH6使用，建议您下载WH8并整理下模型思路，我们看下

WH8下载 http://cxh.wenhua.com.cn/index.asp

LENGTH:=100;

STRENGTH:=8;

TOLERANCE:=10;

P1BAR := PEAK(HIGH,8,1,1);

P2BAR: = PEAK(HIGH,8,1,1);

T1BAR: = TROUGH(LOW,8,1,1);

T2BAR: = TROUGH(LOW,8,1,1);

T2:=REF(LOW,1);

P2:=REF(HIGH,1);

T1:=REF(LOW,1);

P1:=REF(HIGH,1);

F1 := 0.618;

F2 := 0.786;

F3 := 1.27;

F4 := 1.618;

GD:=LOW;

PTVALID:=P1BAR < T1BAR AND T1BAR < P2BAR AND P2BAR < T2BAR;

HLVALID:=P1 < P2 AND T1 > T2 AND P1 > T1;

INZONE:=GD < T1 AND GD > T2 AND P2 >= HHV(HIGH, T2BAR);

IF PTVALID AND HLVALID AND INZONE THEN BEGIN

XA:=P2 - T2;

AB:=P2 - T1;

BC:=P1 - T1;

CD:=P1 - GD;

AD:=P2 - GD;

ABDXA:=AB / XA;

C1:=ABDXA > F1 - TOLERANCE AND ABDXA < F1 + TOLERANCE;

BCDAB:=BC / AB;

C2:=BCDAB > F1 - TOLERANCE AND BCDAB < F2 + TOLERANCE;

CDDBC:=CD / BC;

C3:=CDDBC > F3 - TOLERANCE AND CDDBC < F4 + TOLERANCE;

ADDXA:=AD / XA;

C4:=ADDXA > F2 - TOLERANCE AND ADDXA < F2 + TOLERANCE;

GD:=HIGH;

PTVALID:=T1BAR < P1BAR AND P1BAR < T2BAR AND T2BAR < P2BAR;

HLVALID:=T1 > T2 AND P1 < P2 AND T1 < P1;

INZONE:=GD > P1 AND GD < P2 AND T2 <= LLV(LOW, P2BAR);

IF PTVALID AND HLVALID AND INZONE THEN BEGIN

XA:=P2 - T2;

AB:=P1 - T2;

BC:=P1 - T1;

CD:=GD - T1;

AD:=GD - T2;

ABDXA:=AB / XA;

C1:=ABDXA > F1 - TOLERANCE AND ABDXA < F1 + TOLERANCE;

BCDAB:=BC / AB;

C2:=BCDAB > F1 - TOLERANCE AND BCDAB < F2 + TOLERANCE;

CDDBC:=CD / BC;

C3:=CDDBC > F3 - TOLERANCE AND CDDBC < F4 + TOLERANCE;

ADDXA:=AD / XA;

C4:=ADDXA > F2 - TOLERANCE AND ADDXA < F2 + TOLERANCE;

TR : MAX(MAX((HIGH-LOW),ABS(REF(CLOSE,1)-HIGH)),ABS(REF(CLOSE,1)-LOW));//求最高价减去最低价，一个周期前的收盘价减去最高价的绝对值，一个周期前的收盘价减去最低价的绝对值，这三个值中的最大值

ATRVALUE : MA(TR,BARPOS),COLORYELLOW;

VP := 100 * ATRVALUE / MINPRICE;

REVERSAL := ROUND(C * VP,0);

P1 := PEAK(HIGH, F1 * REVERSAL,1,1);

P1BAR := PEAKBARS(HIGH, F1 * REVERSAL,1,1);

P2 := PEAK(HIGH, REVERSAL,1,1);

P2BAR := PEAKBARS(HIGH, REVERSAL,1,1);

T1 := TROUGH(LOW, F1 * REVERSAL,1,1);

T1BAR := TROUGHBARS(LOW, F1 * REVERSAL,1,1);

T2 := TROUGH(LOW, REVERSAL,1,1);

T2BAR := TROUGHBARS(LOW, REVERSAL,1,1);

D := L;

PTVALID := (P1BAR > T1BAR) AND (T1BAR > P2BAR) AND (P2BAR > T2BAR);

HLVALID := (P1 < P2) AND (T1 > T2) AND (P1 > T1);

INZONE := (D < T1) AND (D > T2);

XA := P2 - T2;

AB := P2 - T1;

BC := P1 - T1;

XD := P2 - (F2 * XA);

CD := P1 - XD;

AD := P2 - XD;

ABDXA := AB / XA;

C1 := (ABDXA > F1 - TOLERANCE) AND (ABDXA < F1 + TOLERANCE);

BCDAB := BC / AB;

C2 := (BCDAB > F1 - TOLERANCE) AND (BCDAB < F2 + TOLERANCE);

CDDBC := CD / BC;

C3 := (CDDBC > F3 - TOLERANCE) AND (CDDBC < F4 + TOLERANCE);

ADDXA := AD / XA;

C4 := (ADDXA > F2 - TOLERANCE) AND (ADDXA < F2 + TOLERANCE);

END

DRAWLINE1(P2BAR, P2, T2BAR, T2, COLORBLUE);

DRAWLINE1(T1BAR, T1, P2BAR, P2, COLORBLUE);

DRAWLINE1(P1BAR, P1, T1BAR, T1, COLORBLUE);

DT := F1 * CD;

BT := XD + DT;

BS := T2;

DRAWLINE1(T2BAR, T2, P2BAR, P2, COLORRED);

DRAWLINE1(P1BAR, P1, T2BAR, T2, COLORRED);

DRAWLINE1(T1BAR, T1, P1BAR, P1, COLORRED);

投资者咨询：[求助]请老师修改蝴蝶指标 (文华财经随身行iPhone 5.3.8)

来源:文华财经日期:2017-10-31 8:58

老师给看一下哪里出问题了谢谢

技术人员回复

日期:2017-11-3 13:30

您代码参考4楼回复，很多地方编写和当前我们软件是冲突的

建议您重新量化后给您编写下

LENGTH:=100;

STRENGTH:=8;

TOLERANCE:=10;

P1BAR := PEAK(HIGH,8,1,1);

P2BAR: = PEAK(HIGH,8,1,1);

T1BAR: = TROUGH(LOW,8,1,1);

T2BAR: = TROUGH(LOW,8,1,1);

T2:=REF(LOW,1);

P2:=REF(HIGH,1);

T1:=REF(LOW,1);

P1:=REF(HIGH,1);

F1 := 0.618;

F2 := 0.786;

F3 := 1.27;

F4 := 1.618;

GD:=LOW;

PTVALID:=P1BAR < T1BAR AND T1BAR < P2BAR AND P2BAR < T2BAR;

HLVALID:=P1 < P2 AND T1 > T2 AND P1 > T1;

INZONE:=GD < T1 AND GD > T2 AND P2 >= HHV(HIGH, T2BAR);

IF PTVALID AND HLVALID AND INZONE THEN BEGIN

XA:=P2 - T2;

AB:=P2 - T1;

BC:=P1 - T1;

CD:=P1 - GD;

AD:=P2 - GD;

ABDXA:=AB / XA;

C1:=ABDXA > F1 - TOLERANCE AND ABDXA < F1 + TOLERANCE;

BCDAB:=BC / AB;

C2:=BCDAB > F1 - TOLERANCE AND BCDAB < F2 + TOLERANCE;

CDDBC:=CD / BC;

C3:=CDDBC > F3 - TOLERANCE AND CDDBC < F4 + TOLERANCE;

ADDXA:=AD / XA;

C4:=ADDXA > F2 - TOLERANCE AND ADDXA < F2 + TOLERANCE;

GD:=HIGH;

PTVALID:=T1BAR < P1BAR AND P1BAR < T2BAR AND T2BAR < P2BAR;

HLVALID:=T1 > T2 AND P1 < P2 AND T1 < P1;

INZONE:=GD > P1 AND GD < P2 AND T2 <= LLV(LOW, P2BAR);

IF PTVALID AND HLVALID AND INZONE THEN BEGIN

XA:=P2 - T2;

AB:=P1 - T2;

BC:=P1 - T1;

CD:=GD - T1;

AD:=GD - T2;

ABDXA:=AB / XA;

C1:=ABDXA > F1 - TOLERANCE AND ABDXA < F1 + TOLERANCE;

BCDAB:=BC / AB;

C2:=BCDAB > F1 - TOLERANCE AND BCDAB < F2 + TOLERANCE;

CDDBC:=CD / BC;

C3:=CDDBC > F3 - TOLERANCE AND CDDBC < F4 + TOLERANCE;

ADDXA:=AD / XA;

C4:=ADDXA > F2 - TOLERANCE AND ADDXA < F2 + TOLERANCE;

ATRVALUE : MA(TR,BARPOS),COLORYELLOW;

VP := 100 * ATRVALUE / MINPRICE;

P1 := PEAK(HIGH, 5,1,1);

P1BAR := PEAKBARS(HIGH, 5,1,1);

P2 := PEAK(HIGH, 3,1,1);

P2BAR := PEAKBARS(HIGH, 3,1,1);

T1 := TROUGH(LOW, 5,1,1);

T1BAR := TROUGHBARS(LOW, 5,1,1);

T2 := TROUGH(LOW, 3,1,1);

T2BAR := TROUGHBARS(LOW, 3,1,1);

D := L;

PTVALID := (P1BAR > T1BAR) AND (T1BAR > P2BAR) AND (P2BAR > T2BAR);

HLVALID := (P1 < P2) AND (T1 > T2) AND (P1 > T1);

INZONE := (D < T1) AND (D > T2);

XA := P2 - T2;

AB := P2 - T1;

BC := P1 - T1;

XD := P2 - (F2 * XA);

CD := P1 - XD;

AD := P2 - XD;

ABDXA := AB / XA;

C1 := (ABDXA > F1 - TOLERANCE) AND (ABDXA < F1 + TOLERANCE);

BCDAB := BC / AB;

C2 := (BCDAB > F1 - TOLERANCE) AND (BCDAB < F2 + TOLERANCE);

CDDBC := CD / BC;

C3 := (CDDBC > F3 - TOLERANCE) AND (CDDBC < F4 + TOLERANCE);

ADDXA := AD / XA;

C4 := (ADDXA > F2 - TOLERANCE) AND (ADDXA < F2 + TOLERANCE);

END

DRAWLINE1(P2BAR, P2, T2BAR, T2, COLORBLUE);

DRAWLINE1(T1BAR, T1, P2BAR, P2, COLORBLUE);

DRAWLINE1(P1BAR, P1, T1BAR, T1, COLORBLUE);

DT := F1 * CD;

BT := XD + DT;

BS := T2;

DRAWLINE1(T2BAR, T2, P2BAR, P2, COLORRED);

DRAWLINE1(P1BAR, P1, T2BAR, T2, COLORRED);

DRAWLINE1(T1BAR, T1, P1BAR, P1, COLORRED);

投资者咨询：[求助]请老师修改蝴蝶指标 (文华财经随身行iPhone 5.3.8)

来源:文华财经日期:2017-10-31 8:58

强烈要求修改一个蝴蝶指标出来啊，市面上股票软件没有一个现成的。老师改出来就有市场了。

技术人员回复

日期:2018-6-11 11:35

蝴蝶指标属于自编指标范畴，需要您量化后才能编制出来的

您可以研究下蝴蝶指标的完整思路，告知我们给您改下

{{userData.name}}已认证

[求助]请老师修改蝴蝶指标 (文华财经随身行iPhone 5.3.8)

期货技术

高手榜

期货手续费

期权手续费

期货行情

期货全档行情