文章
文章用户商铺文档快讯有问必答话题

你好 这个公式的支撑可否改成阻力可以改为蓝色，支撑改为红色，都要粗线 (文华财经WH6赢顺V6.7)

投资者咨询：你好 这个公式的支撑可否改成阻力可以改为蓝色，支撑改为红色，都要粗线 (文华财经WH6赢顺V6.7)
来源:文华财经  日期:2018-6-29 15:50
  TJA1:=ABS(C-O)>REF(ABS(C-O),1)*1.5&&VOL>REF(VOL,1)*1.5&&ISUP;
TJA2:=ABS(C-O)>REF(ABS(C-O),1)*1.5&&VOL>REF(VOL,1)*1.5&&ISDOWN;
//STICKLINE(TJA1,C,O,COLORRED,0);
//STICKLINE(TJA2,C,O,COLORBLUE,0);
//DRAWKLINE1(8/10,COLORRED,1,COLORBLUE,0);
//STICKLINE(C>0,(C+O)/2,(C+O)/2,COLORBLUE,1);
HD:=FILTER(BACKSET(FILTER(REF(H,10)=HHV(H,2*10+1),10),10+1),10);
LD:=FILTER(BACKSET(FILTER(REF(L,10)=LLV(L,2*10+1),10),10+1),10);
支撑:=REF(LOW,BARSLAST(LD)),COLORBLUE,POINTDOT,LINETHICK3;
压力:=REF(HIGH,BARSLAST(HD)),COLORBLUE,POINTDOT,LINETHICK3;
DRAWNUMBER1(HD,HIGH,HIGH,0),COLORMAGENTA,ALIGN1,VALIGN2;
DRAWNUMBER1(LD,LOW,LOW,0),COLORRED,ALIGN1,VALIGN0;
DRAWSL(C>0,支撑,0,1,0,COLORRED),RGB(0,255,64),LINETHICK2;
DRAWSL(C>0,压力,0,1,0,COLORBLUE),COLORMAGENTA,LINETHICK2;

技术人员回复
日期:2018-6-29 16:17
 参考：


  TJA1:=ABS(C-O)>REF(ABS(C-O),1)*1.5&&VOL>REF(VOL,1)*1.5&&ISUP;
TJA2:=ABS(C-O)>REF(ABS(C-O),1)*1.5&&VOL>REF(VOL,1)*1.5&&ISDOWN;
//STICKLINE(TJA1,C,O,COLORRED,0);
//STICKLINE(TJA2,C,O,COLORBLUE,0);
//DRAWKLINE1(8/10,COLORRED,1,COLORBLUE,0);
//STICKLINE(C>0,(C+O)/2,(C+O)/2,COLORBLUE,1);
HD:=FILTER(BACKSET(FILTER(REF(H,10)=HHV(H,2*10+1),10),10+1),10);
LD:=FILTER(BACKSET(FILTER(REF(L,10)=LLV(L,2*10+1),10),10+1),10);
支撑:=REF(LOW,BARSLAST(LD)),COLORRED,POINTDOT,LINETHICK4;
压力:=REF(HIGH,BARSLAST(HD)),COLORBLUE,POINTDOT,LINETHICK4;
DRAWNUMBER1(HD,HIGH,HIGH,0),COLORMAGENTA,ALIGN1,VALIGN2;
DRAWNUMBER1(LD,LOW,LOW,0),COLORRED,ALIGN1,VALIGN0;
DRAWSL(C>0,支撑,0,1,0,COLORRED),RGB(0,255,64),LINETHICK2;
DRAWSL(C>0,压力,0,1,0,COLORBLUE),COLORMAGENTA,LINETHICK2;
投资者咨询：你好 这个公式的支撑可否改成阻力可以改为蓝色，支撑改为红色，都要粗线 (文华财经WH6赢顺V6.7)
来源:文华财经  日期:2018-6-29 15:50
没有变化
技术人员回复
日期:2018-6-29 18:48
 参考：

TJA2:=ABS(C-O)>REF(ABS(C-O),1)*1.5&&VOL>REF(VOL,1)*1.5&&ISDOWN;
//STICKLINE(TJA1,C,O,COLORRED,0);
//STICKLINE(TJA2,C,O,COLORBLUE,0);
//DRAWKLINE1(8/10,COLORRED,1,COLORBLUE,0);
//STICKLINE(C>0,(C+O)/2,(C+O)/2,COLORBLUE,1);
HD:=FILTER(BACKSET(FILTER(REF(H,10)=HHV(H,2*10+1),10),10+1),10);
LD:=FILTER(BACKSET(FILTER(REF(L,10)=LLV(L,2*10+1),10),10+1),10);
支撑:=REF(LOW,BARSLAST(LD)),COLORRED,POINTDOT,LINETHICK4;
压力:=REF(HIGH,BARSLAST(HD)),COLORBLUE,POINTDOT,LINETHICK4;
DRAWNUMBER1(HD,HIGH,HIGH,0),COLORMAGENTA,ALIGN1,VALIGN2;
DRAWNUMBER1(LD,LOW,LOW,0),COLORRED,ALIGN1,VALIGN0;
DRAWSL(C>0,支撑,0,1,0,COLORRED),COLORRED,LINETHICK2;
DRAWSL(C>0,压力,0,1,0,COLORBLUE),COLORBLUE,LINETHICK2;