文章
文章用户商铺文档快讯有问必答话题

反手编写 (文华财经WH6赢顺V6.7)

投资者咨询：反手编写 (文华财经WH6赢顺V6.7)
来源:文华财经  日期:2018-7-5 2:43
 老师，你好。请问在自动化程序中出现B就买进（多头），然后就把空头平掉；出现S就卖出（空头），然后就把多头平掉。应该怎么编写程序的。   

图片点击可在新窗口打开查看    
技术人员回复
日期:2018-7-5 8:23
 您用反手指令BPK,SPK就行了

您BS 应该是用DRAWTEXT或DRAWICON标注的

您把函数第一个参数条件提出，分别添加,BPK;  ,SPK;就行了
 
投资者咨询：反手编写 (文华财经WH6赢顺V6.7)
来源:文华财经  日期:2018-7-5 2:43
 DRAWICON(买1>0 OR   买2>0,LOW-CLOSE/15,'ICO107'),COLORRED;
DRAWICON(卖1>0,HIGH+CLOSE/15,'ICO106'),COLORGREEN;
是这个指令嘛？
技术人员回复
日期:2018-7-5 11:34
 是这个指令

买1>0 OR   买2>0,BPK;
卖1>0,SPK;
投资者咨询：反手编写 (文华财经WH6赢顺V6.7)
来源:文华财经  日期:2018-7-5 2:43
老师帮忙把这个程序       出现B时半小时后就买入一手，出现S就把买入的那手平掉，再过半小时再做空一手，出现B就把做空的那手平掉，再过半小时再做多一手，以此类推。还有就是这个BS离得太远了，能不能放下来一些

图片点击可在新窗口打开查看


VARF:=TROUGHBARS(C,6,1,1)<4 AND CROSS(VARD,VARE);
ZAG(C,22,1),1)<=REF(ZIGZAG(C,22,1),2) AND REF(ZIGZAG(C,22,1),2)<=REF(ZIGZAG(C,22,1),3);
VAR14:=ZIGZAG(C,22,1)<REF(ZIGZAG(C,22,1),1) AND REF(ZIGZAG(C,22,1),1)>=REF(ZIGZAG(C,22,1),2) AND REF(ZIGZAG(C,22,1),2)>=REF(ZIGZAG(C,22,1),3);
VAR15:=ZIGZAG(C,51,1)>REF(ZIGZAG(C,51,1),1) AND REF(ZIGZAG(C,51,1),1)<=REF(ZIGZAG(C,51,1),2) AND REF(ZIGZAG(C,51,1),2)<=REF(ZIGZAG(C,51,1),3);
VAR16:=ZIGZAG(C,51,1)<REF(ZIGZAG(C,51,1),1) AND REF(ZIGZAG(C,51,1),1)>=REF(ZIGZAG(C,51,1),2) AND REF(ZIGZAG(C,51,1),2)>=REF(ZIGZAG(C,51,1),3);
VAR17:=ZIGZAG(C,72,1)>REF(ZIGZAG(C,72,1),1) AND REF(ZIGZAG(C,72,1),1)<=REF(ZIGZAG(C,72,1),2) AND REF(ZIGZAG(C,72,1),2)<=REF(ZIGZAG(C,72,1),3);
VAR18:=ZIGZAG(C,72,1)<REF(ZIGZAG(C,72,1),1) AND REF(ZIGZAG(C,72,1),1)>=REF(ZIGZAG(C,72,1),2) AND REF(ZIGZAG(C,72,1),2)>=REF(ZIGZAG(C,72,1),3);
VAR19:=EMA(CLOSE,2)-EMA(CLOSE,150);
VAR1A:=EMA(VAR19,100);
VAR1B:=2*(VAR19-VAR1A);
VAR1C:=POW(VAR1B,3)*0.1+POW(VAR1B,1);
VAR1D:=SQRT(SQRT(LOW*HIGH*OPEN*CLOSE));
VAR1E:=EMA(VAR1D*0.97,3);
VAR1F:=(HIGH+LOW+CLOSE)/3;
VAR20:=(VAR1F-MA(VAR1F,14))/(0.015*AVEDEV(VAR1F,14));
VAR21:=CROSS(VAR1E,LOW);
买1:=VAR10;
买2:=(VAR11+VAR13+VAR15+VAR17);
卖1:=(VAR12+VAR14+VAR16+VAR18);
VAR22:=买1 AND VARF AND VARC AND VAR21 AND VAR4<0 AND VAR5=0 AND VAR6=0 AND VAR20<(-110);
VAR1:=MA(CLOSE,5);
VAR2:=MA(CLOSE,10);
VAR3A:=MA(CLOSE,30);
VAR4A:=MA(CLOSE,60);
VAR5A:=EMA(COST(85),7);
VAR6A:=EMA(COST(15),7);
VAR7A:=SUM(CLOSE*VOL*100,4)/SUM(VOL*100,4);
VAR8A:=INTPART(VAR7*100)/100;
VAR9A:=SUM(CLOSE*VOL*100,7)/SUM(VOL*100,7);
VARA1:=INTPART(VAR9*100)/100;
VARB1:=SUM(CLOSE*VOL*100,28)/SUM(VOL*100,28);
VARC1:=INTPART(VARB*100)/100;
VARD1:=EMA(CLOSE,5)-EMA(CLOSE,10);
VARE1:=EMA(VARD,9);
VARF1:=(-100)*(HHV(CLOSE,5)-CLOSE)/(HHV(CLOSE,5)-LLV(LOW,5))+100;
VAR10A:=(-100)*(HHV(CLOSE,10)-CLOSE)/(HHV(CLOSE,10)-LLV(LOW,10))+100;
VAR11A:=(-100)*(HHV(CLOSE,20)-CLOSE)/(HHV(CLOSE,20)-LLV(LOW,20))+100;
VAR12A:=(-100)*(HHV(CLOSE,30)-CLOSE)/(HHV(CLOSE,30)-LLV(LOW,30))+100;
VAR13A:=REF(VARE,1);
VAR14A:=VARE;
VAR15A:=VAR14-VAR13;
VAR16A:=REF(VARD,1);
VAR17A:=VARD;
VAR18A:=VAR17-VAR16;
VAR19A:=OPEN;
VAR1AA:=CLOSE;
买3:=IF(VAR19<=VAR1 AND VAR19<=VAR2 AND VAR19<=VAR3 AND VAR1A>=VAR1 AND VAR1A>=VARC AND VAR15>0 AND VAR18>0,0.5,0);
买线:=EMA(CLOSE,2);
卖线:=EMA(SLOPE(CLOSE,21)*20+CLOSE,42);
B1买:=IF(买1>0 OR 买2>0,LOW-0.02,0),NODRAW,COLORRED;
S1卖:=IF(卖1>0,HIGH+0.02,0),NODRAW,COLORGREEN;
DRAWICON(买1>0 OR 买2>0,LOW-CLOSE/15,'ICO107'),COLORRED;
DRAWICON(卖1>0,HIGH+CLOSE/15,'ICO106'),COLORGREEN;
B1买1:=IF(买1>0 OR 买2>0,LOW-0.02,0);
S1卖1:=IF(卖1>0,HIGH+0.02,0);
B2买1:=IF(CROSS(买线,卖线),LOW-0.02,0);
S2卖1:=IF(CROSS(卖线,买线),HIGH+0.02,0);
STICKLINE1(COUNT(S1卖1>0,BARSLAST(B1买1>0))=0 AND CLOSE>=OPEN,OPEN,CLOSE,10,1),COLORRED;
STICKLINE1(COUNT(S1卖1>0,BARSLAST(B1买1>0))=0 AND CLOSE>=OPEN,OPEN,LOW,0,0),COLORRED;
STICKLINE1(COUNT(S1卖1>0,BARSLAST(B1买1>0))=0 AND CLOSE>=OPEN,CLOSE,HIGH,0,0),COLORRED;
STICKLINE1(COUNT(S1卖1>0,BARSLAST(B1买1>0))=0 AND CLOSE<OPEN,OPEN,CLOSE,10,0),COLORRED;
STICKLINE1(COUNT(S1卖1>0,BARSLAST(B1买1>0))=0 AND CLOSE<OPEN,LOW,HIGH,0,0),COLORRED;
STICKLINE1(COUNT(B1买1>0,BARSLAST(S1卖1>0))=0 AND CLOSE<=OPEN,OPEN,CLOSE,10,0),COLORCYAN;
STICKLINE1(COUNT(B1买1>0,BARSLAST(S1卖1>0))=0 AND CLOSE<=OPEN,LOW,HIGH,0,0),COLORCYAN;
STICKLINE1(COUNT(B1买1>0,BARSLAST(S1卖1>0))=0 AND CLOSE>OPEN,OPEN,CLOSE,10,1),COLORCYAN;
STICKLINE1(COUNT(B1买1>0,BARSLAST(S1卖1>0))=0 AND CLOSE>OPEN,OPEN,LOW,0,0),COLORCYAN;
STICKLINE1(COUNT(B1买1>0,BARSLAST(S1卖1>0))=0 AND CLOSE>OPEN,CLOSE,HIGH,0,0),COLORCYAN;
STICKLINE1(BARSLAST(B1买1>0)=BARSLAST(S1卖1>0) AND CLOSE>=OPEN,OPEN,CLOSE,10,1),COLORBLUE;
STICKLINE1(BARSLAST(B1买1>0)=BARSLAST(S1卖1>0) AND CLOSE>=OPEN,OPEN,LOW,0,0),COLORBLUE;
STICKLINE1(BARSLAST(B1买1>0)=BARSLAST(S1卖1>0) AND CLOSE>=OPEN,CLOSE,HIGH,0,0),COLORBLUE;
STICKLINE1(BARSLAST(B1买1>0)=BARSLAST(S1卖1>0) AND CLOSE<OPEN,OPEN,CLOSE,10,0),COLORBLUE;
STICKLINE1(BARSLAST(B1买1>0)=BARSLAST(S1卖1>0) AND CLOSE<OPEN,LOW,HIGH,0,0),COLORBLUE;
B2指导线:=EMA((EMA(CLOSE,4)+EMA(CLOSE,6)+EMA(CLOSE,12)+EMA(CLOSE,24))/4,2),COLORFFFFFF,LINETHICK2;


             
技术人员回复
日期:2018-7-5 13:14
看了下指标，您源码中是用未来函数ZIGZAG判断定位的

不能和交易指令连用，请您更换模型后，我们再给您看下
投资者咨询：反手编写 (文华财经WH6赢顺V6.7)
来源:文华财经  日期:2018-7-5 2:43
 把这个BS  可以放下来一些可以 么
技术人员回复
日期:2018-7-5 13:39
DRAWICON  2句这么改下就行

DRAWICON(买1>0 OR 买2>0,LOW,'ICO107'),COLORRED,VALIGN0;
DRAWICON(卖1>0,HIGH,'ICO106'),COLORGREEN,VALIGN2;